Tile Installation · Phoenix Metro
Phoenix Tile Installers for Floors, Showers, Backsplashes & Patios
Licensed tile contractor, not a handyman. Porcelain, ceramic, marble, travertine, mosaic and large-format tile, set flat and level by the same crew that gives you the quote.
- ✔ Licensed & insured, Arizona ROC #311992
- ✔ Family-owned, European-trained craftsmen, since 2009
- ✔ Labor from $10 per sq ft, itemized before we start
- ✔ Schluter, Mapei & LATICRETE setting systems
- ✔ Every photo on this page is our own finished work
Free In-Home Tile Evaluation
We respond within 24 hours. No obligation.
What We Install
One Tile Crew for the Whole House
Tile is all we do, which is why Phoenix homeowners call us after a flooring company's "tile guy" left lippage across the living room or a shower started leaking at 18 months. Here is the work we take on every week across the Valley.
Floor tile
Porcelain, wood-look plank, travertine and large-format tile for living areas, kitchens, bathrooms and entryways. Demo of old tile included.
Floor tile details →Shower & bathroom tile
Walk-in showers, tub surrounds, tub-to-shower conversions, bathroom floors and walls, all with proper waterproofing.
Shower tile details →Kitchen backsplash
Subway, glass, mosaic, herringbone and natural stone backsplashes, cut clean around outlets and cabinets.
Backsplash details →Outdoor & patio tile
Porcelain pavers and stone-look tile for patios, fireplaces, pool surrounds and exterior walls, rated for Arizona heat.
Outdoor tile details →Tile repair & regrouting
Cracked or loose tile replaced and matched, showers and floors regrouted and sealed.
LVP flooring
Luxury vinyl plank for bedrooms and living rooms, including LVP-and-tile combination projects.
LVP details →Honest Numbers
Tile Installation Cost in Phoenix
Our labor runs about $10 to $25 per square foot depending on tile size, pattern, substrate prep and demo. These are the ranges we actually quote, not national averages.
| Project | Typical labor |
|---|---|
| Bathroom floor (50–80 sq ft) | $800 – $2,000 |
| Standard shower, tile only | $2,500 – $5,000 |
| Kitchen backsplash (30–50 sq ft) | See our backsplash cost guide |
| Whole-room floor, standard porcelain | $10 – $14 per sq ft |
| Large-format, mosaic or natural stone | $16 – $25 per sq ft |
Tile material adds $2 to $25+ per square foot. Full breakdowns: shower tile cost, bathroom tile remodel cost, travertine vs porcelain.
Why It Matters
What a Licensed Tile Installer Does That a Handyman Doesn't
Substrate prep
Floors are checked for flatness and movement before a single tile goes down. Uncoupling membranes where Arizona slabs need them.
Waterproofing
Showers get a Schluter KERDI membrane or a traditional mud bed. Not a liner stapled to studs.
Layout & leveling
Cuts planned so they land where you won't see them. Leveling systems on large-format tile so there's no lippage to catch a bare foot.
Accountability
ROC #311992 means the Arizona Registrar of Contractors stands behind the license. Insured. The same crew from estimate to final cleanup.
Our Work
Recent Tile Projects Across the Phoenix Metro
Every photo is actual work completed by our team — no stock images.
Common Questions
Tile Installation FAQ
How much does tile installation cost per square foot in Phoenix?
Our labor runs roughly $10 to $25 per square foot depending on tile size, pattern, substrate preparation and whether old tile has to be removed. Large-format, mosaic and natural stone sit at the higher end. Tile material adds $2 to $25+ per square foot. A standard bathroom floor of 50 to 80 square feet runs $800 to $2,000 in labor.
Do you supply the tile or do I buy it?
Either. Many homeowners pick tile themselves at Arizona Tile, Floor & Decor, MSI or Monterrey Tile and we install it. If you prefer, we recommend options that fit your budget and the room, and we can source it for you. We supply the setting materials: Schluter, Mapei and LATICRETE systems.
How long does a tile floor installation take?
A typical 300 to 500 square foot floor takes 2 to 4 days including demo, substrate prep, setting and grouting. Whole-home floors and large-format tile take longer because every piece must be leveled to avoid lippage. You get a firm timeline at your free in-home evaluation.
Can you install large-format tile and porcelain slabs?
Yes. Large-format porcelain (24x48 and larger) is a specialty of ours. It requires flat substrates, a leveling system and the right trowel and mortar, which is why it goes wrong in inexperienced hands. We install it on floors, shower walls and feature walls across Phoenix and Scottsdale.
Do you repair cracked tile or regrout?
Yes. We replace cracked or loose tiles, match existing tile as closely as possible, and regrout showers and floors. For small repairs there is a minimum service charge, which we tell you up front.
Tile Installers by City
Get a Tile Quote You Can Actually Compare
Free in-home evaluation anywhere in the Phoenix metro. Itemized labor, materials and timeline, no pressure.